WHAT ARE THE STEPS IN CRIMPING RJ-45 CONNECTOR?

THERE ARE 8 STEP OF HOW TO CRIMPING THE RJ-45, but first we need to know what is the RJ-45? RJ-45 is a network port on a computer, and it's wired directly into the network adapter inside of the computer, and so is the cable interface to that device.

These are the materials of how to crimping the rj-45 connector. The UTP CAT 5E cable , rj-45 connector, the scissors or the crimping tool, and the flathead screwdriver.

STEP 1:Get the scissors or crimping tool and the cable,and remove about 1 inch of the outer sheath without damage the inner wires, and gently cut the cable not so deep make a cut around the cable

STEP 2: Simply untwist and straighthen the wire inside the cable.

STEP 3: Arrange the wires into the order.

STEP 4:Cut the 1/2 inch of the wires,and if not have a crimping tool it can be used also the scissors.

STEP 5: Insert the wires inside of rj-45 connector and make sures that the wires stayed in order.

STEP 6 : Push the pins down with flathead screwdriver if we do not have a crimping tool and to not shed the wires inside the connector.

STEP 7: Pull down the end of connector to make sure the pins are pressed in the wires.

STEP 8: The last one is crimp the RJ-45 connector.